It is essential to know the technology of bonding, how to properly glue shoes. To attach the top of the product with rubber (polyurethane or PVC) sole is best-used glue “Dismacol,” but you can any other analog. Of course, this glue is a well-glued and leather sole.
To not have to go home barefoot because of unexpectedly unstuck shoes, it is necessary to regularly monitor the condition of the product and, if necessary to glue it promptly, returning it to its pristine appearance. Sticking soles is a fairly simple and short process. You can repair the product in 25 minutes. Be sensitive to shoes. For example, walking several times in the rain graceful sandals – you risk completely put them up.
Knowing the elementary rules of bonding products, you should consistently execute them not to spoil the shoe’s material. The Momentum glue is better not to apply because it is less reliable.
If you are afraid of the appearance of your shoes, it is better to take them to a shoe shop, where shoes will be repaired quickly, carefully, and efficiently. In addition, experts will give a guarantee.
How to glue shoes yourself?
How to glue shoes so that in the future, they can be confidently used? It’s not as hard as, for example. First, you need to clean the mark from the dirt and residues of the material (skin or skin substitute) with a sharp object. Then it is necessary to smear all places of subsequent bonding with large sandpaper, skim alcohol and profusely smear them with glue with a brush. Next, you need to glue dry, for which we forget about shoes for 20 minutes. When the glue is absorbed (it will be almost invisible), glued surfaces need to be re-smeared with glue.
If touching your fingers to the treated surface, the glue does not even stick, then it is well dried, and it should be activated. To do this, it is heated to 80 degrees Celsius with an electric spit or a powerful hairdryer. Then the heated, fastened surfaces are tightly pressed against each other with your fingers. It is recommended for a more durable connection to press the fastened spaces with a hard object, such as a screwdriver, or to use a load.
During the day, the shoe parts should be finally glued together, so the product is not recommended immediately after the repair is put on. After 24 hours, the dried glue will begin to carry out its basic functions. The mark, glued by such method, will not immediately come unstuck, and the product will last a certain time.
In long-term and constant operation, shoes deformed, while diverging seams, there are holes. It is quite possible to avoid repairing shoes in the workshop and solve the problem yourself in some situations.
How to start repairing shoes yourself: how to prepare a shoe, how to choose glue
To glue the shoe, you need to choose glue. Several glue brands, such as Moment, PVC, rubber glue, PVA – are suitable for shoes, shoes including. Glue based on polyvinylate is not recommended because the properties of this glue are reduced when the product comes into contact with water.
Before you paste the shoe, it should be properly prepared – wash with a brush and soap, rinse with clean water, leave to dry for a day. So you avoid sticking a dirty surface and double work as a result. Not enough dry shoes will not be able to fasten the glue properly. As a result, you will not achieve the expected result.
After that, you need to take a small piece of material or cotton disk, moisten it in acetone, process glued surfaces and start gluing. Skimming the surface will prevent poor bonding. The bonding will be even better if you clean the glued surfaces with sandpaper. It is not only acetone that can be skimmed. Ordinary gasoline will also be suitable.
How to stick your shoe: the process from start to finish
You need to apply a sufficient layer of glue on the glued surface and leave it to dry for 10 minutes. The glue must acquire some denser structure that will help remove its excess easily and without leaks when compressed with another surface. After that, you need to strongly squeeze the shoe with the sole or other glued surfaces. Hold two surfaces pressed for a while. This will allow the glue to cling. After that, the shoes should be put under the press for a day, for example, under the chair’s foot, etc.
How to tap the shoe with a patch?
You may need to glue shoes and in the case of a patch. Then to glue the shoe, before applying glue, put cotton wool or a newspaper inside the shoe so that the glue did not get inside. After that, skim the shoe’s surface, then the surface of the patch, and carefully apply the glue on the patch in the places where the patch will fit the shoes. Do not apply glue on the entire surface of the patch because then the glue can get into the shoe through the glued slit. In this case, it is better to apply glue to place the patch on the shoe and let the glue stand for a few minutes. Then apply the patch, press it and fix it, creating a press. To build some semblance of a press and glue the shoe, bandage the shoe, preventing the displacement of the patch and providing a good grip.
What to do if sticking a shoe has not brought results – stitch shoes.
In this case, you can sew shoes. In this case, without the help of an experienced specialist, too, can not do. If you decide to try to do the procedure yourself and at your own risk, you will need capron threads and a thick shoe needle. When self-piercing shoes, remember that shoes can become smaller by several or one sizes when stitched. And of course, do not sew expensive shoes, which you do not want to spoil. After all, this procedure is carried out in shoe shops on special equipment, which guarantees the quality and aesthetic appearance of the shoe after repair.
You shouldn’t sew your own shoe to connect the place with a hole. After all, if you choose the wrong indentation, you still will not be able to use shoes; their size will be too small for you.
No matter how high-quality and expensive shoes you buy, sooner or later it wears out, and sometimes even breaks. Most people, in this case, resort to the help of a specialist. Some prefer to save on repairs and solve the problem on their own. About 80% of all modern shoes are made with adhesive compounds. In the repair, also use glue, which almost completely replaced the threads and cloves. Professionals say that currently, adhesives are the best way to provide a reliable and strong grip. It is difficult to say which glue for shoes is the best. It depends on the type of product and the specific task.
Without experience, it is impossible to choose the right glue for shoes. Experts recommend using the products of only well-known brands. Let’s list what advantages adhesives should have:
- Reliability and durability
- Frost resistance;
- The thickness of the glued elements should not have a significant impact on the grip strength;
- Lack of rigidity
- Keeping the integrity of the bonding materials
- the elasticity of seams.
With these parameters, the glue effectively copes with its task. Of all the varieties of adhesives available for sale, we have identified the highest quality and reliability. Real user reviews helped us.